Midpoints and Bi Wheel display

Article Information
Article ID:	156
Author:	Marilyn
Created:	4/21/2006
Modified:	4/21/2006
Views:	1,497

Midpoints and Bi Wheel display

There are a couple of buttons that control the midpoint lines when you are looking at a bi dial. By default the midpoint lines only appear between the pointer and planets on the inner dial. If you hit the swap button, then the inner and outer dials will switch, transits will move down to the inner dial and you will see the midpoints to those.

However, if you want to keep the natal chart on the inner ring, and see the midpoint lines on the outer ring you can do that also. There is another button that says I/I which means Inner to Inner and it controls the midpoint lines. If you hit the button again it will say I/O which means Inner to Outer and it will only show midpoint lines between the inner and outer planets. One point must be on the inner ring, and one point must be on the outer ring. Then you can press it again and it will say O/O which means outer to outer, and in this case it will show you the midpoint lines among the points on the outer ring only.